FEATURES- Voice Gateway with Router
- Intelligent Call Routing Gateway Solution for VoIP!
- The SPA3102 features the ability to connect standard telephones and fax machines to IP-based data networks with the additional benefit of an integrated connection for legacy telephone network "hop-on, hop-off" applications. SPA3102 users will be able to leverage their broadband phone service more than ever by automatically routing local calls from mobile phones and land lines over to VoIP service providers and vice versa. If power is lost to the unit or Internet service is down, calls can be redirected to a traditional carrier via the FXO interface.
- A user calling from a mobile phone or land line will be able to reduce and even eliminate international and long distance telephone charges by first calling their SPA3102 via a local telephone number. The advanced authentication and call routing intelligence programmed into the SPA3102 will route the call via the Internet to the far end destination. In addition, when using the SPA3102 at the far end, VoIP calls placed to that location can be either answered or further processed and routed on as a local call to any legacy land line or mobile phone.
- The SPA3102 supports one RJ-11 POTS (Plain Old Telephone Service) FXS port to connect an existing analog phone or fax machine. The SPA3102 also supports one PSTN FXO port to connect to a Telco or PBX circuit. The SPA3102 includes twp 100BaseT RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to a broadband modem or router. The SPA3102 FXS and FXO lines can be independently configured via software controlled by the service provider or the end user.
- Installed by the end user and remotely provisioned, configured and maintained by the service provider, each SPA3102 converts voice traffic into data packets for transmission over an IP network.
- Compact in design, the SPA3102 can be used in consumer and business VoIP service offerings including a full-featured IP Centrex environment. The SPA3102 uses international standards for voice and data networking for reliable voice and fax operation.
- Includes SPA3102 Phone Adapter Unit, Power Adapter, RJ-45 Ethernet Cable, RJ-11 Telephone Cable, Quick Installation Guide.
Toll Quality Voice and Carrier-Grade Feature Support
- The SPA3102 delivers clear, high-quality voice communication in diverse network conditions. Excellent voice quality in a demanding IP network is consistently achieved via our advanced implementation of standard voice coding algorithms. The SPA3102 is interoperable with common telephony equipment like voicemail, Fax, PBX, and interactive voice response systems.
Large-Scale Deployment and Management
- The SPA3102 offers all the key features and capabilities which service providers can provide customized VoIP services to their subscribers. The SPA3102 can be remotely provisioned and supports dynamic, in-service software upgrades. A secure profile upload saves providers the time, expense, and hassle of managing and pre-configuring or re-configuring customer premise equipment (CPE) for deployment.
Ironclad Security
- Linksys understands that security for end users and service providers is a fundamental requirement for a solid, carrier-grade telephony service. The SPA3102 supports secure, standard encryption-based methods for communication, provisioning and servicing.
-- SPECIFICATIONs ------------------------------------
CONNECTORS - (2) 10BaseT/100BaseTX/RJ45 ports (1 WAN, 1 LAN)
(1) FXS/RJ-11 port (for analog circuit telephone device)
(1) FXO/RJ-11 port (for Telco or PBX Connection)
SUBSCRIBER LINE INTERFACE CIRCUIT- (SLIC)
Ring Voltage : 40 - 55 Vrms configurable
Ring Frequency : 10 Hz - 40 Hz
Ring Waveform : Trapezoidal and Sinusiodal
Ringer Load : 3 REN max.
On-hook/Off-hook Characteristics:
On-hook voltage (tip/ring): -50 V Nominal
Off-hook current: 25 mA min.
Terminating Impedance: Eight Configurable
settings including North America 600
Ohms, European CTR21.
INDICATORS - LEDs for Power, Internet, Phone 1, Phone 2
TELEPHONY - Service Authentication via PIN, Digest, Caller ID (Bellcore
Type 1).
Per Call Authentication and Associated Routing
Least Cost Routing Support
Impedance Agnostics - 8 Settings
Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
Detection (Bellcore Type 1).
Caller ID with Name/Number (Multi-national Variants)
Caller ID Blocking
Call Forwarding to PSTN or VoIP Service: No answer, Busy,
All.
Do Not Disturb, Call Transfer
Three-way Conference Calling with Local Mixing
Message Waiting Indication - Visual and Tone Based
Call Return, Call Back on Busy
Call Blocking with Toll Restriction
Delayed Disconnect
Distinctive Ringing - Calling and Called Number
Off-hook Warning Tone
Selective/Anonymous Call Rejection
Hot line and Warm Line Calling
Speed Dialing of 8 Numbers/Addresses
Music on Hold
Fax: G.711 Pass Through or Real Time Fax over IP via T.38
SPA3102 SPECIFIC-
VoIP to PSTN (USA) Service Call Origination and Termination
PSTN (USA) to VoIP Service Call Origination and Termination
Single Stage and Two Stage Dialing
Forward Calls to VoIP service - Selective, Authenticated,
All.
Forward Calls to PSTN service - Selective, Authenticated,
All.
PSTN Line Sharing with Multiple Extensions
Automatic PSTN Fallback (Loss of Power or IP Service to Unit
- with Quiescence to Normal Operations).
Advanced Inbound and Outbound Call Routing
Independent Configurable Dial Plans - Up to 8
Force PSTN Disconnection
Sequential Dialing Support
VoIP to PSTN AUTHENTICATION & ROUTING-
VoIP-to-PSTN Gateway Enable/Disable
VoIP Caller Auth. Method: Note, PIN, HTTP Digest
VoIP PIN Max Retry Setting
One Stage Dialing Enable/Disable
VoIP Caller ID Pattern Matching
VoIP Access Allowed Caller List (no further authentication)
VoIP Caller PIN and Associated Dial Plan - up to 8
PSTN to VoIP AUTHENTICATION-
PSTN-to-VoIP Gateway Enable/Disable
Caller Auth Method: None, PIN, Caller ID
Ring through FXS Enable/Disable
Ring through Tone - Configurable
Caller ID (Bellcore) for VoIP Service Access
Caller ID Enable/Disable
PIN Max Retry Setting
Access Allowed Caller List (no further authentication)
Caller PIN and Associated Dial Plan - up to 8
Least Cost Routing (via Outbound VoIP - Line 1 Dial Plan)
FXO BEHAVIOR - VoIP Answer Delay Timer
PSTN Answer Delay Timer
VoIP PIN Digit Time-out Timer
PSTN PIN Digit Time-out Timer
PSTN-to-VoIP Call Max. Duration Timer
VoIP-to-PSTN Call Max. Duration Timer
PSTN Ring through Delay Timer
PSTN Dialing Delay Timer
VoIP DLG Refresh Interval Timer
PSTn Ring Time-out Timer
PSTN DISCONNECTION DETECTION-
CPC (Removal of Tip/Ring Voltage momentarily)
Polarity Reversal
Long Silence (Configurable Time Setting)
Disconnect Tone (e.g. Reorder Tone)
Silence Threshold
INTERNATIONAL CONTROL-
FXO Port impedance - configurable to 16 settings
Ring Frequency - configurable
SPA to PSTN and PSTN to SPA Gain Settings
Ring Frequency - maximum setting
Ring Validation Time Setting
Tip/Ring Voltage Adjustment Setting
Ring Indication Delay Setting
Operational Loop Current Minimum Value
Ring Time-Out Setting
On-Hook Speed Setting
Ringer Impedance Setting
Line-In-Use Voltage Setting
DATA NETWORKING-
MAC Address (IEEE 802.3)
IPv4 - Internet Protocol version 4 (RFC 791) upgradeable to
v3 (RFC 1883).
ARP - Address Resolution Protocol
DNS - A Record (RFC 1706), SRV Record (RFC 2782)
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
PPoE Client - Point to Point Protocol over Ethernet
(RFC 2516)
ICMP - Internet Control Message Protocol (RFC792)
TCP - Transmission Control Protocol (RFC793)
UDP - User Datagram Protocol (RFC768)
RTP - Real Time Protocol (RFC 1889) (RFC 1890)
RTCP - Real Time Control Protocol (RFC 1889)
DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
VLAN Tagging - 802.1p
SNTP - Simple Network Time Protocol (RFC 2030)
Upload Data Rate Limiting - Static and Automatic
QoS - Voice Packet Prioritization over Other Packet Types
Router or Bridge Mode of Operation
MAC Address Cloning
Port Forwarding
VOICE GATEWAY- SIPv2 - Session Initiation Protocol Version 2 (RFC 3261,
3262, 3263, 3264)
SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
Re-registration with Primary SIP Proxy Server
SIP Support in Network Address Translation Networks -
NAT (including STUN)
Secure (Encrypted) Calling via Pre-Standard Implementation
of Secure RTP.
Codec Name Assignment
VOICE ALGORITHMS-
G.711 (A-law and mu-law)
G.726 (16/24/32/40 Kbps)
G.729A
G.723.1 (6.3 Kbps, 5.3 Kbps)
Dynamic Payload
Adjustable Audio Frames per Packet
FAX CAPABILITY-
Fax Tone Detection Pass-through (Using G.711)
Fax Pass-Though - Using G.711
DTMF - In-hand & Out-of-BAnd (RFC 2833)(SIP INFO)
Flexible Dial Plan Support with Interdigit Timers and IP
Dialing.
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
Full Duplex Audio
Echo Cancellation - (G.165.G.168)
VAD - Voice Activity Detection with Silence Suppression
Attenuation/Gain Adjustments
Flash Hook Timer
MWI - Message Waiting Indicator Tones
VMWI - Via FSK
Polarity Control
Hook Flash Event Signaling
Caller ID Generation (Name & Number)-Bellcore, DTMF, ETSI
Music on Hold Client
Streaming Audio Server - up to 10 sessions
SECURITY - Password Protected System Reset to Factory default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication vai MD5 (RFC 1321)
Up to 256-bit AES or RC4 Encryption
PROVISIONING, ADMINISTRATION & MAINTENANCE-
Web Browser Administration and Configuration via Integral
Web Server.
Telephone Key Pad configuration with Interactive Voice
Prompts.
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade availability via NOTIFY
Non-Intrusive, In-Service Upgrades
Report Generation and Event Logging
Stats in BYE Message
Syslog and Debug Server Records- Per Line Configurable
Per Line and Purpose configurable Syslog and Debug options
APPROVALS - FCC (Part 15 Class B), CE, ICES-003, A-Tick Certification,
RoHS.
POWER SUPPLY - DC Input Voltage : +5 VDC at 2.0 A Max.
Power Consumption: 5 Watts
Power Adapter : 100-240v - 50-60Hz (26-34VA) AC Input
Switching Type (100-240v) Automatic
DIMENSIONS - 3.98" x 3.98" x 1.10" WT.- 5.11 oz.
www.linksys.com
